Sweed Hydraulic Shears

Alligator shears are the answer to many scrap problems. Shears can be used for trimming fittings off copper tubing, cutting reinforcing steel to length, or cutting up of post production scrap. Alligator shears are available in many models to fit the needs of your facility and your scrap material. These shears can handle all types of mild steel, bar, wire and cable, various metal products, plates and tubes. Sweed/Ramjet alligator shears are simple to operate and easy to maintain, utilizing two adjustable blades which are designed to be reground to sustain their sharpness. To determine if your application or situation can benefit from a Sweed/Ramjet alligator shear, contact a Sweed Machinery representative for a complete analysis.

 

Sweed Model 10-27 Mini Shear

The Sweed 10-27 Mini-Shear is designed to fulfill the need for a small portable trimming and clearing shear. The Sweed Mini-Shear can be used for trimming fittings off copper tubing, cutting reinforcing steel to length, cutting up production rejects—to name a few uses. The Mini-Shear is manufactured from mild steel throughout with the jaw opening to 31/2” at the tips. The machine features an easily adjustable blade and all brushes and pins are fitted with grease points. This unit also features a remote foot control unit and incorporate a safety interlock which opens the jaw at any point in the cycle immediately when the foot is removed from the pedal.

STANDARD ELECTRICAL OPTIONS

• 1-Phase - 220 volt - 60 Hz - 17 Amps

• 3-Phase - 240 volt - 60 Hz - 9.6 Amps

• 3-Phase - 480 volt - 60 Hz - 4.8 Amps

PERFORMANCE DATA

• Max Operating Pressure ............................................ 3000 psi

• Power 3 HP ............................................................... 3 HP

• Blade Length ............................................................. 10”

• Top Blade .................................................................. Straight

• Bottom Blade .............................................................. Notched

• Shearing Capacity ..................................................... 27 Ton

• Shear Force .............................................................. 3/4” Dia Mild

• Shipping Weight ......................................................... 450 lbs.

• Stock Feed Height ..................................................... 44”

• Large Hydraulic Reservoir ........................................ 6 3/4 Gallons

• Fork Pockets for Ease of Mobility

• Heavy Duty Footswitch

• Spillway

• Right-hand or Left-hand Feed

 

Sweed Model 16-50 Hydraulic Shear

Info coming soon

 

NOTE: All shears have a 5 second cycle time from fully open to close and fully open again. They also have standard safety guards as required by OSHA. The foot pedal control when released ensures that the top jaw returns to the fully open position, this safety feature is standard on all Sweed shears.